Polymetaal

This is a superior liquid hard ground for etching. It is applied with a flat soft brush. After the plate has been smoked it presents a satin black surface which is easily drawn upon, responding to the most intricate and finely detailed needling with no risk of flaking or foul biting.

Solvents to remove the ground: Turpentine, benzine, mineral spirits, VCA's, like AIII and Geowash K

Dimensions: diameter 5cm (2"), height 12 cm (5"). Weight 0,2 kg (0.45 lb)
The bottle is provided with a safety cap.

This is a superior liquid hard ground for etching. It is applied with a flat soft brush. After the plate has been smoked it presents a satin black surface which is easily drawn upon, responding to the most intricate and finely detailed needling with no risk of flaking or foul biting.

Solvents to remove the ground: Turpentine, benzine, mineral spirits, VCA's, like AIII and Geowash K

Dimensions: diameter 6 cm (2.4"), height 15 cm (6"). Weight 0,4 kg (0.9 lb)
The bottle is provided with a safety cap.

This is a superior liquid hard ground for etching. It is applied with a flat soft brush. After the plate has been smoked it presents a satin black surface which is easily drawn upon, responding to the most intricate and finely detailed needling with no risk of flaking or foul biting.

Solvents to remove the ground: Turpentine, benzine, mineral spirits, VCA's, like AIII and Geowash K

Dimensions: diameter 10 cm (4"), height 22 cm (8.7"). Weight 1,4 kg (3 lb)
The bottle is provided with a safety cap.

This another traditional product which, as its name implies, is used in very thin coats as a retouching varnish and as a covering varnish. It is highly recommended for use in the aquatint technique to obtain shadings of tone and to maintain blank, unteched passages on the plate. It is rapid drying.

Solvents to remove the ground: Turpentine, benzine, mineral spirits, VCA's, like AIII and Geowash K

Dimensions: diameter 5cm (2"), height 12 cm (5"). Weight 0,2 kg (0.45 lb)
The bottle is provided with a safety cap.

This another traditional product which, as its name implies, is used in very thin coats as a retouching varnish and as a covering varnish. It is highly recommended for use in the aquatint technique to obtain shadings of tone and to maintain blank, unteched passages on the plate. It is rapid drying.

Solvents to remove the ground: Turpentine, benzine, mineral spirits, VCA's, like AIII and Geowash K

Dimensions: diameter 6 cm (2.4"), height 15 cm (6"). Weight 0,4 kg (0.9 lb)
The bottle is provided with a safety cap.

This varnish is a new and exclusive product of the ARTOOLS line. It forms a very tough, protective coating for the backs and borders of plates. It is highly resistant to acid, heat and additional scratching of the plate's back surface. It also serves as an excellent stop out varnish as well. This protecting and aquatint hard ground used with an air-brush brings astonishing results in "liquid aquatint". It dries well, and allows remarquable nuancing. The most diluted applications become extremely pastelmanner mezzotint, while thick applications result in perfect whites.

Solvent to remove the ground: Ethyl alcohol

Dimensions: diameter 5cm (2"), height 12 cm (5"). Weight 0,2 kg (0.45 lb)
The bottle is provided with a safety cap.

This varnish is a new and exclusive product of the ARTOOLS line. It forms a very tough, protective coating for the backs and borders of plates. It is highly resistant to acid, heat and additional scratching of the plate's back surface. It also serves as an excellent stop out varnish as well. This protecting and aquatint hard ground used with an air-brush brings astonishing results in "liquid aquatint". It dries well, and allows remarquable nuancing. The most diluted applications become extremely pastelmanner mezzotint, while thick applications result in perfect whites.

Solvent to remove the ground: Ethyl alcohol

Dimensions: diameter 6 cm (2.4"), height 15 cm (6"). Weight 0,4 kg (0.9 lb)
The bottle is provided with a safety cap.

This varnish is a new and exclusive product of the ARTOOLS line. It forms a very tough, protective coating for the backs and borders of plates. It is highly resistant to acid, heat and additional scratching of the plate's back surface. It also serves as an excellent stop out varnish as well. This protecting and aquatint hard ground used with an air-brush brings astonishing results in "liquid aquatint". It dries well, and allows remarquable nuancing. The most diluted applications become extremely pastelmanner mezzotint, while thick applications result in perfect whites.

Solvent to remove the ground: Ethyl alcohol

Dimensions: diameter 10 cm (4"), height 22 cm (8.7"). Weight 1,4 kg (3 lb)
The bottle is provided with a safety cap.

The solvent-absorptive action of the SOLVENT LIFT GROUND may be used to remove selected areas of hard ground, expose the bare metal and to allow for aquatinting (or other working) of those areas without removing the ground from the entire plate.
It works equally well on a plate which has been grounded with traditional ball or liquid ground and is especially suited for use with our SATIN BLACK GROUND and our new INSTANT BLACK GROUND. Areas to be removed are painted with the SOLVENT LIFT GROUND and allowed to rest for a few minutes. They are then gently rubbed with a soft rag or cotton pellet. This exposes the metal as drawn.

Solvents to remove the ground: Turpentine, benzine, mineral spirits, VCA's, like AIII and Geowash K

Dimensions: diameter 5cm (2"), height 12 cm (5"). Weight 0,2 kg (0.45 lb)