Japanese Side Grain Woodblocks, for woodcut
Katsura side grain wood
|
|
|
|
|
This tree species, Cercidiphyllum japonicum (Japanese Judas tree), can reach 40-45 m in height with a trunk of 2 m in diameter; it is one of the largest "hardwood" trees in Asia. This wood is made from the "Japanese Judas Tree", the material from which the traditional Japanese woodcuts were made. This wood is fairly soft and easy to cut. It is free from "knots" and other iniquities. Wood is a natural material, so a piece of wood may be slightly curved. This shouldn't be a problem during printing, especially when printing with the "baren", the traditional Japanese printing tool. Printing is also possible on an etching press or platen press. If necessary, place a PVC plate (approx. 5 mm thick) on the printing plate and paper, so that the pressure forces of the press are evenly distributed over the wood block via the PVC plate. |
Transport, verpakking Als u wenst dat de platen verstuurd worden, dient u uit onderstaande drie mogelijkheden te kiezen. Alleen dan worden de geschatte tranport- en verpakkingskosten berekend |
Pakketvervoer Als de
platen met DPD
of Post.nl
verstuurd worden, en groter zijn dan 20x30cm, is het nodig
om ze te beschermen tussen twee muliplex platen. |
Wegtransport Als de
platen op een pallet
verstuurd worden (wegtransport), klik op
"Pallet
toevoegen"
en voeg vervolgens een passende pallet aan uw mandje
toe. |
Zeevracht Als de
platen in een krat
verstuurd worden (zeevracht), klik op
"Krat
toevoegen"
en voeg vervolgens een passend krat toe. |