|
|
Bed size |
70 x 140cm |
28x55" |
Top roller diameter |
15 cm |
6" |
|
Bed thickness |
1,5 cm |
0.6" |
Wall thickness rollers |
1,8 cm |
0.7" |
|
Press dimensions: |
|
Lower roller diameter |
14 cm |
5.5" |
|
- Length (of side frames) |
140 cm |
55" |
Press work height |
87 cm |
34" |
|
- Width (overall) |
120 cm |
47" |
Thickness of steel side frames |
3 cm |
1.2" |
|
- Height |
135 cm |
53" |
Max. clearance between bed and top roller |
10 cm |
4" |
|
Length of rollers |
70 cm |
28" |
Screw thread of pressure spindles |
M 24 (metric) |
|
Press weight |
265 kg |
583 lbs |
Speed motor |
variable |
|
Power electric motor |
750 Watt |
Printing speed |
0-10 cm/sec |
0-4"/sec |
|
Power supply converted into 3 phase with variable frequency |
230 Volt AC, monophase
optional
120 Volt AC monophase (USA) |
Minimum passage required to move the press, gearing, electric control box removed |
94 cm |
37" |
|
If the press must be shipped on a pallet by road freight in Europe, click on the pallet to the right. The pallet page will open and add this pallet (125x150x150 cm) to your shopping basket |
Pallet wrapped in cardboard and plastic foil. Delivery door to door
|
|
Pallet weight |
325 kg, 715 lbs |
|
If the press must be shipped in a crate by sea freight world wide, click on the crate to the right. The crate page will open and add this crate (125x150x150 cm) to your shopping basket |
Wooden crate. Delivery until port of destination. CFR. Fumigation cost excl. if applicable
|
|
Crate weight |
350 kg, 770 lbs | The press comes with several options; casters, a wooden shelf under the press. It is also possible to supply the press with a hydraulic pressure system, which guarantees always an even pressure on both sides of the press. For the American market the press can be fitted with a 120 Volt AC monophase motor. |
