!
Polymetaal
交货时间要求
163510
重 量: kg

Etching press JZE-100, switchable between manual drive and electric drive, variable speed

Technical data etching press JZE-100

Bed size

111 x 200 cm

44" x 79"

Diameter top roller

30 cm

12"

Bed thickness

2 cm

0.8"

Wall thickness of the rollers

3,2 cm

1.3"

Press dimensions:

Diameter bottom roller

32 cm

12.6"

- Length (of sideframes)

190 cm

75"

Work height of the press

88 cm

35"

- Width (including hand wheel)

160 cm

63"

Thickness of the steel side frames

5 cm

2"

- Height

160 cm

63"

Maximum opening between bed and top roller

10 cm

4"

Length of rollers

100 cm

39.4"

Schrew thread of pressure spindles (metric)

M 30

Press weight

1300 kg

2860 lbs

Diameter of the hand wheel

92 cm

36"

Diameter shafts in bearing blocks

8 cm

3.2"

Minimum door width required to move the press, without gear box and electric cabinet

Voltage required for the system (is being converted by frequency converter into 3-fase power with variable frequency)

230 Volt. AC monophase

120 volt AC monophase as option

Variable printing spreed

1-6 cm/sec

0.4-2.4"/sec

Power electric motor

1000 Watt

210 x 160 x 180 cm. Crate dimensions for shipping by road freight in Europe and sea freight outside Europa.


Wooden crate. Door to door via road freight inside Europe. Via sea freight, outside Europe, until port of destination, CFR. Excluding fumigation (if required)

Weight of the crate

1450 kg

3190 lbs

De pers kan geleverd worden met zwenkwielen.

Transport:

  • You can pick up the press in Leiden.
  • Most of the times the press must be assembled by Polymetaal in your studio, because of steps, doors, elevators, etc. Ask a quote.
  • Delivery by road freight or sea freight. Ask a quote.

Links: