Rosin dust box SK-50 capacity 50 x 60 cm

Normaal gesproken op voorraad
Weight: kg


All resin dust boxes in the SK series are equipped with a rotating blade. This traditional system is still the best guarantee for an even distribution of the resin powder. This blade is driven on the outside via a crank. The SK-50 has a fixed wooden grille and a direct drive to the blade. The dust boxes are made of lacquered plywood.

  • Wooden grille (visible in the photo)
  • The tub in which the blade rotates is made of wood. (no build-up of static electricity with the risk of sparks)
  • The seams of the cabinet are dust-proof.
  • Operator side hatch is small to reduce swirling dust loss.
  • This hatch has an extra wooden edge to reduce dust loss.
  • The space extinguishes the grid is large, so that the powder particles have sufficient "whirl space".
  • The back of the dust box has a removable inspection hatch.
Technical data Resin Dust Box SK-50

Maximum capacity

50 x 60 cm

19" x 23"

Outside dimensions

55 x 69 x 152 cm

22" x 28" x 60"

The box cannot be taken apart, but the crank, shaft and bearing blocks can be taken off if needed. If these parts are taken off, the minimum required passage way is 55 cm or 22"

Total depth of the box, incl. crank

74 cm


Total depth of the box, without the crank (is taken off for transport)

68 cm


Total width

69 cm


Totale height

152 cm



30 kg

66 lbs

For road freight and sea freight, the resin dust box has to be sent on a pallet.

Pallet wrapped with cardboard and plastic.

Weight of the pallet as above

50 kg


  • Yoiu can collect the resin dust box in Leiden (Holland)
  • Sometimes it is possible that we bring the rosin dust box ourselves.
  • Delivery by road freight in Europe (DSV). (Europa) or with sea freight (outside Europe)