Polymetaal

Rosin dust box SK-60, capacity 60 x 80 cm (24"x31.5")

Polymetaal

Normaal gesproken op voorraad

110103

Weight: kg

+Shipping

Description

All resin dust boxes in the SK series are equipped with a rotating blade. This traditional system is still the best guarantee for an even distribution of the resin powder. This blade is driven on the outside via a crank. The SK-60 has a fixed wooden grille and a direct drive to the blade. The dust boxes are made of lacquered plywood.
characteristics:

Wooden grille (visible in the photo)
The tub in which the blade rotates is made of wood. (no build-up of static electricity with the risk of sparks)
The seams of the cabinet are dust-proof.
Operator side hatch is small to reduce swirling dust loss.
This hatch has an extra wooden edge to reduce dust loss.
The space extinguishes the grid is large, so that the powder particles have sufficient "whirl space".
The back of the dust box has a removable inspection hatch.

Technical data Resin Dust Box SK-60

Maximum capacity	60 x 80 cm	23" x 31"
Outside dimensions	65 x 89 x 152 cm	26" x 35" x 60"
The box cannot be taken apart, but the crank, shaft and bearing blocks can be taken off if needed. If these parts are taken off, the minimum required passage way is 65 cm or 26"
Total depth of the box, incl. crank	83 cm	33"
Total depth of the box, without the crank (is taken off for transport)	77 cm	31"
Total width	89 cm	35"
Totale height	152 cm	60"
Weight	35 kg	77 lbs
For road freight and sea freight, the resin dust box has to be sent on a pallet.	Pallet wrapped with cardboard and plastic.
Weight of the pallet as above	55 kg

Transport:

Yoiu can collect the resin dust box in Leiden (Holland)
Sometimes it is possible that we bring the rosin dust box ourselves.
Delivery by road freight in Europe (DSV). (Europa) or with sea freight (outside Europe)