Graphic Chemical conditioners for Lithography Inks
Sureset Compound reduces "the tack" of the ink to reduce the stickeness to the paper. The main main field however is lithography. It has an important effect on colour printing. By adding Sureset Compound in the first colours printed, the artist is able to keep those colours open for trapping of colours later. Sureset Compound is available in 1/4 pound tubes, one pound cans and cartridges.
Dimensions can
diameter 10cm x 9cm, 4x3.8"
Weight
0,5 kg, 1 lbs
Cobalt Drier is an additive that is used to hasten drying time. Generally speaking it will cause an ink to dry from the outside in, and should be used in extreme moderation. 1-2 drops is usually more than sufficient to achieve the desired result.
diameter can 8,5 cm, 3,3"height of can 10 cm, 4"
Clearset compound is a soft gel additive used to reduce the tack of an ink while trying to mmaintain the body of an ink. Add as needed to achieve the required consistency.
Weight 1.3 lbs , 600 gramsDimensions 4 x 4 x 4" , 10 x 10 x 10 cmContent: 1 Pint, 0,5 litreThis product can be used for all oil-based inks; litho-inks, etching-inks, block-print-inks, etc.
A light powder that gives body to lithographic inks and etching inks. The ink becomes stiffer. Many lithographers use this material in the humidifying water (for stone or slab). The stone or plate therefore remains cleaner. Use a dust mask.
Weight 0,2 kg.(0.5 lbs) Diameter 10 cm.(4") height 15 cm (6")
Graphic Chemical conditioners for Lithography Inks
